FA
top of page

AIX 에서 changer 가 안보일 경우

작성자 사진: MasterMaster

최종 수정일: 2022년 3월 20일

AIX 에서 Netvault changer 가 안보일 경우


test>cfgmgr

cfgmgr: 0514-621 WARNING: The following device packages are required for

device support but are not currently installed.

devices.fcp.changer


위와 같이 chgmgr 에서 오류가 발생할 경우,


OS에서 Device 파일이 없기 때문에 발생, Backup software 에서 수동으로 만들어 주어야 합니다.


n AIX 5.x에서는 SMIT 유틸리티를 사용하여 NVBU SCSI 드라이버를 로드합니다.


n AIX 6.1에서는 다음 명령을 실행하여 AIX5changer를 설치합니다(바이너리가 /tmp에 있다고 가정).


installp -acqd /tmp/aix5changer netvault.chm 그리고 나서 다음 명령을 실행하여 미디어 체인저를 자동으로 검색 및 구성합 니다.



위와 같이 첨부된 aix5changer 를 AIX OS 에 Install 합니다.


그리고 아래의 경로에 addchm 명령어를 실행하면


/usr/lpp/netvault/addchm


root>/usr/lpp/netvault/addchm



Scanning SCSI buses for unknown chm devices


Found “OVERLAND” “LXB” on scsi1 at Connection Address [3,0]


Adding LXB as a generic CHM device



root>mkdev -c chm -s scsi -t generic -p scsi1 -w 3,0



wa0 Available



/dev/wa0



위와 같이 Device 파일이 생성 되어야 한다.



하지만 위와 같이 보이지 않고 보일 경우 강제로 Device 파일을 생성해야 한다.




/usr/lpp/netvault/addproduct “Scalar i500” ( Device 가 Scalar i500 일 경우)




/usr/lpp/netvault/addchm 다시 실행 후



Netvault 에서 다시 device 를 구성하게 되면, 정상적으로 Library 가 보이게 됩니다.



참고)


/usr/lpp/netvault/addproduct “StorageTek L700/L180” (Device 가 L180일 경우)


/usr/lpp/netvault/addproduct “Scalar i2000” (Device 가 i2000 일 경우)






아래로그는 trace 를 통해 Device 명을 검색하는 방법을 나타내는 것입니다. 참고하시기 바랍니다.





· How to use Netvault trace to find product ID for the addproduct command


· Description


The addproduct command allows an unrecognized device to be added to the AIX operating system's ODM Device Database so that it can be detected. The usage of this command is as follows:


addproduct <SCSI product ID>


This <SCSI product ID> corresponds to the 1-16 byte string returned in an 'inquiry' command, after the 8-byte Vendor ID. The string must be entered exactly as it appears in the reply to this command.


You can find the product ID by running a trace of netvault library manager module while trying to add a library.


· Resolution


You need to LIBVERBOSE trace the "Library Manager" module in NetVault.


1. Stop NetVault

2. Enable tracing as per solution SOL78909

3. Start NetVault

4. Attempt to add device

5. Wait 5 minutes

6. Stop NetVault


The PRODUCT ID will be listed in a "nvchgmgr???.log" file, search for "Product".


If the device can accept SCSI passthrough commands, there will be a block similar to the following -


SCSI :467108 14 0 425 CMD INQUIRY [ 12 00 00 00 32 00 ]

SCSI :467108 16 0 425 CMD STATUS 'GOOD' [0]

SCSI :467108 20 0 425 CMD RETURN VALUE 0

SCSI :467108 1 0 425 Fill Inquiry response (BEGIN)

SCSI :467108 2 0 425 Vendor: ATL

SCSI :467108 3 0 425 Product: P1000 6220050


Using this as an example, the command will be:


# /usr/lpp/netvault/addproduct "P1000 6220050


· Additional Information`


BakBone SFDC Solution Number: 00003212



감사합니다.

조회수 1회댓글 0개

최근 게시물

전체 보기

NetBackup Oracle Restore

Controlfile 복구 하기 Netbackup Job Overview 에서 File List 확인 ex) /c-12348342342345-03 오라클 계정에서 아래 스트립트 명령어 수행 #rman cmdfile=nbu_ctrl.sh RUN{...

Commentaires

Noté 0 étoile sur 5.
Pas encore de note

Ajouter une note

관련 제품

O​AM Electronics Co., Ltd.
서울특별시 송파구 충민로 66, 8층 8071호
8071F,  66, Chungmin-ro, Songpa-gu, Seoul, Republic of Korea
​ Tel : 1666-3736     
 Tech Support : 070-7537-3438   
 Zip code : 05838

​공장 : 이천시 모가면 소고리 70-4 
70-4, Sogo-ri, Moga-myeon, Icheon-si, Gyeonggi-do, Republic of Korea
​​통신 판매업 신고 : 2025-서울송파-0108
bottom of page