NetVault Time Sync
- Master
- 2024년 10월 3일
- 2분 분량
Synchronize NetVault time with system : 백업 서버가 아닌 다른 대상의 넷볼트 머신 (이름)대상 서버으로 타임서버로 설정 시 (대체 시) , 즉 넷볼트 클라이언트 이름을 기입합니다.
About NetVault Time
NetVault designates a Time Server, called NetVault Time Server, to synchronize time on the server and all client machines in the NetVault Domain. Typically, the NetVault Server acts as the NetVault Time Server, and the system time on this machine is the NetVault Time. However, you can designate any other NetVault machine as the NetVault Time Server. NetVault ignores the local time on the clients and uses NetVault Time for all time-specific operations, such as job scheduling, reporting, and tracing.
Configuring an alternate NetVault Time Server
To establish an alternate NetVault machine as the NetVault Time Server:
1 | In the Navigation pane, click Change Settings. |
2 | On the NetVault Server Settings page, complete one of the following actions: |
To configure default settings for the NetVault Server, continue to Step 3. |
To configure default settings for a NetVault Client, click Choose machine. In the Choose machine drawer, select the client, and click Go to settings. |
3 | Under System and Security, click Time Sync. In the Time Sync dialog box, configure the following settings. |
Table 142. Time synchronization settings | |
Setting | Description |
This machine is the NetVault time server | This check box is selected by default on the NetVault Server. To configure an alternate time server, clear this check box on the NetVault Server. |
Synchronize NetVault time with system | Type the NetVault name of the alternate time server. |
Number of ping-pongs to determine time difference | Type or select the number of time packets to be exchanged while polling. The default value is 5. |
Number of hours between time sync updates | Specify how often the NetVault Server checks to see if it is still synchronized with the time server. The default polling interval is 24 hours. |
Number of milliseconds of time difference allowed between 2 servers | Type or select the allowed time variance. By default, NetVault allows 1000-millisecond variance between the NetVault Server and the NetVault Time Server. |
4 | Click Apply to apply the new settings and close the dialog box. |
Comments